An outstanding table using a solid wood chassis in a sandwich technology. A massive aluminum platter weighing 2.3 kg is used to get enough inertia and weight to make sure that vibration is absorbed and that speed fluctuation is very low. The motor is fully electronic and synchronous, using a belt to drive the platter. This table stands on decoupling rubber feet and offers both speeds 33 1/3 and 45 RPM by electronic speed selection.

This rig comes complete with the TP 41 tonearm and an Audio Technica AT-95E cartridge. The TD 295 also offers a semiautomatic switch-off made with opto-electronic devices that add no extra mass to the tonearm.

Drive System: Thorens precision belt drive
Motor: electronic-controlled Synchronous motor
Speed: 33, 45 RPM
Speed Select: electronically
Platter: 304 mm/2.3 kg non-magnetic
Tonearm and Cartridge: TP 41 with Audio Technica AT-95E
Antiskating: weight
Switch-Off: mechanical
Capacity of signal leads: 160 pF
Power Supply: AC-Adapter, available for every important voltage worldwide
Dimensions (WxDxH): 430 x 365 x 145 mm
Weight: 8.5 kg