|
|
TD 810 Turntable with TP250VT arm
Thorens
|
The chassis is made of 19-mm thick high-density wood. This is
flexibly bonded to a five-mm thick steel plate. This new sandwich is much
better than ordinary construction in signal behavior and resonance
absorption. The steel plate has laser-made cutouts to make sure that no
magnetic distortion influences the audio signal. Standing on three
polymer-damped adjustable feet that are also height adjustable, the chassis
is decoupled and isolated from the mounting surface. The Thorens silent-run
bearing is made of two sinter bushes with a polished stainless steel axle
running inside. The tungsten ball at the end is running on a self-lubricating
and absolute maintenance-free bearing point. The low-noise AC motor is
supplied from an electronic motor drive unit. The output signal is generated
completely independent from the mains power. With this you get much better
wow/flutter and virtually no distortion from the mains power source. The
four-kg, 24-mm thick platter is made of aluminum with a damping coating on
the back side. To avoid any vibration, it is belt driven.
The TD 810 comes with a Thorens TP 250 tonearm mounted.
Specifications:
Drive System: Thorens belt drive
Motor: fully electronically-regulated
AC-Synchronous motor
Speed: 33, 45 RPM
Speed Select:
electronically
Platter: 300 mm/4 kg, non-magnetic
Tonearm: Thorens TP
250
Antiskating: magnetic
Switch-off: none
Capacity of signal leads:
120 pF
Power Supply: electronically-regulated power supply for AC
motor
Dimensions (WxDxH): 420 x 330 x 115 mm
Weight: 12 kg
Colors:
aluminum, black
|
|
|
AQVOX
Dr. Feickert
AcousTech
Art Vinyl
Spin Clean
Dealer Locator
Print Media
About Us
Contact Us
